We are underway on electrical and things are going well.  Long wires are run, and we are starting panel stuff.  we installed fuses and circut breakers in this project. Two fuse boxes (essential bus and master bus) that are not available in flight. If you get an electrical short in flight, wait until you are on the ground before trying to fix it. In-flight fires can ruin your day.

The fuse blocks are mounted on a hinged flap that can be lowered by removing two screws.

We also have 4 circuit breakers on the left panel, for alternator field, flaps, trim, and auto pilot. These are the kind that can be manually pulled in case of runaway.

Fuse Cluster

Here is a tip for electrical work.  Buy a handful of alligator jumper wires for testing and fitting. These are pretty cheap, and will help with testing before installing.

Jumper Wires

a 12V electrical test light is also a good purchase.

ANL fuse is mounted on the firewall, and an inline fuse for the master is connected right off the master relay contactor (orange, but hard to see in this picture)

ANL fuse on firewall